• Simple, Durable and Reliable
• Wide Range of Sizes
• Small Footprint – Compact Design
• Range of 4-60 Bhp
Fulton boilers, with the original vertical tubeless down-fired design, have remained a compact trouble-free boiler for over 60 years, supplying steam and hot water to virtually every type of industry imaginable. Fulton vertical tubeless boilers offer efficiencies up to 80%, and can be ordered with oil and/or gas capabilities with low emissions burners (gas only). All Fulton boilers are completely trimmed, packaged boilers. No additional fuel train items or electrical wiring is needed.
MODEL NUMBERS: ICS (Steam), ICW (Hot Water)
Suitable for industries requiring efficient, high quality saturated steam, including laboratories, hospitals, industrial plants, pilot plants, food and chemical processing applications.
These versatile generators are perfect for almost any application requiring steam from 0-100 PSIG. Each unit is complete with automatic features, including pressure and liquid level controllers, ASME Code pressure vessel and safety valve and are fully tested under power. Each one must pass Sussman’s rigid quality control inspection before it is shipped. Sussman Electric Boilers – your source for fast economical steam energy.
ES SERIES FEATURES:
• Safe easy -to-use heat source – No on-site products of combustion.
• Easy, quick to install, they require only a water feed connection and electrical hook-up.
• Applications include: Steam for tanks, reactors, distillations, autoclaves, dyestuffs, food products, cosmetics, paraffins, glues, steam jacketed kettles,sterilizers, cosmetics, pipe tracing and humidification.
• Built to Section I, of ASME Boiler and Pressure Vessel Codes – UL listed and CSA certified.
MODEL NUMBERS: ES-12, 18, 24, 72, 85, 100, 135, 180
Columbia HRT Boilers are constructed in accordance with requirements of Section 1 of the ASME Boiler and Pressure Vessel Code. The HRT’s combustion efficiency is 80% plus. Four inch thick and very spacious castable refractory combustion chamber. Firetubes are rolled and beaded.
MODEL NUMBERS: 20, 30, 40, 50, 60, 70, 80, 100, 125, 150
Columbia CT Boilers feature a three-pass, vertical tubeless design that provides an efficient, compact source for high pressure steam output. The CT’s advanced features and dependable performance ensure that this boiler is tough enough for your business; with our superior product and parts availability, downtime can be significantly reduced.
MODEL NUMBERS: CT-10, CT-l5, CT-20, CT-25, CT-35, CT-50
Rema’s easy to use blow-down separators for boilers 1-50 HP are built of 3/8″ thick, heavy gauge, boiler plate construction, fabricated from high quality steel. Completely safe operation and easy boiler blow-off. Maintenance free and compact design helps clean out sludge and sludge build-up from boiler saving time and money. Mastercraft welded to exceed tough in-code specifications.
MODEL NUMBERS: BD-10, 16, 18
Rema’s 14 gauge steel horizontal return systems feature triple welded tank seams plus rigid, one-piece welded 1-1/4″ steel frames are built to perform and last. All are equipped with exterior safety vent bars, 100% machined brass, 1/2″ ballcocks, shut off valves, strainers, condensate returns, drain valves and six non-twist off studs welded to the tank head. Each incorporates a boiler pump discharge and Burks bronze fitted turbine pump. Tank sizes range from 14″ x 13″ to 18 ” x 48″ and are custom engineered for all steam process applications.
Also available in heavy duty performance.
MODEL NUMBERS: BJ-1, 2, 3, 4, 44, 5, 55, 6, 7, 8, 9
Rema Vertical Return Systems
Rema’s 11 gauge steel vertical return systems are rugged, space saving and economical. These
expertly crafted vertical systems feature copper bearing steel tanks with certified welding; rigid, one-piece 1-1/4″ steel frames and easy to maintain float assemblies which do not require tank drainage for service. Each includes quality floats, valves, fixtures, strainers, Burks pumps, plus a conveniently located boiler pump discharge. The special Rema design generates greater pump head pressure while reducing vapor lock worries. Rema verticals work with almost all boiler equipment.
MODEL NUMBERS: BJHV-2, 3, 4, 44, 5, 55, 6, 7
Constructed with the finest quality materials all compact Fulton blow-off separators meet or exceed
ASME Code and include special features to insure safe boiler blow-off. Fulton Blow-Off Separators
also operate with minimum maintenance.
• Baffle plate absorbs steam flash and pressure
• Steam is expelled safely through vent.Fulton family of products.
• Water and sludge pass through drain to sewer.
• 3″ to 4″ hand hole for cleaning and inspection.
• Fully welded to ASME Pressure Vessel Code.
• Heavy gauge steel tanks.
• Fast, easy hook-up to boiler.
MODEL NUMBERS: F-10, 20, 30, 50, 75, 100, 150, 200
• Heavy gauge properly sized tanks built for quick installation and removal or replacement.
• Heavy duty feed water pump.
• Rigid welded support.
Fulton’s horizontal condensate return systems are designed for all boilers from 1 Bhp to 400 Bhp.
Condensate return systems are completely assembled with tank, stand, hight pressure pump, motor
strainer, float valve, shut-off valve, gauge glass assembly, with overflow and drain openings.
MODEL NUMBERS: HT-8, 10, 20, 30, 50, 60, 80, 100, 150, 200, 250, 300, 350, 400
• 60-300 Bhp
The RB Horizontal boiler was designed to be the highest quality horizontal boiler available, and no compromise was made in that endeavor. With over seventy years of combined design and manufacturing experience, the designers set out to incorporate good customs and practice into modern design and construction methods.
With quality second-to-none, the RB is another safe, reliable, and easily maintainable boiler in the Fulton family of products.
MODEL NUMBERS: RB Series
• High Efficiencies, High Performance
• Long Lasting Heat Exchanger Life
The FB-C is a traditional three-pass, wet-back horizontal firetube boiler. The first pass flows through the furnace from front to back. The furnace is corrugated to maximize efficiency while also minimizing thermal stress. Flue gasses then travel from the combustion furnace to the front chamber forming the second pass. For the third pass gases flow through tubes to the back of the boiler stack and out the exhaust vent, located conveniently in the back of the boiler. The second and third passes travel through heavy-duty seamless tubes.
The FB-C boiler has a liberal steam release area, making it an ideal choice for low pressure steam applications.
MODEL NUMBERS: FB-C Series
• Nearly 100% Efficient
• Quiet and Safe Operation
• Zero NOx Emissions
• Range of 1.2 to 100 Bhp
Fulton Electric boilers are extremely efficient because the heating elements are totally immersed in water and the pressure vessel is fully insulated, which results in minimal radiation losses. With a carefully calculated heat to steam ratio, operating pressures are achieved quickly and with maximum efficiency.
MODEL NUMBERS: FB-L
• Efficiencies up to 84%
• No Tubes to Replace
• Small Footprint – Compact Design
• Range of 40-150 Bhp
Within the Fulton VMP (Vertical Multi-Port) Boiler, a series of heavy walled large diameter schedule 80 flue pipes are welded to the top and bottom heads in the pressure vessel, and these pipes are surrounded by water. The water-backed design speeds up boiler start up time and creates overall even heating throughout. This, along with many other design features of the VMP, result in fuel to steam efficiencies of up to 84%.
MODEL NUMBERS: VMP
With over 45 years experience in designing and building “Rol-Air” air compressors for industrial and dry cleaning applications has earned Rol-Air a reputation for providing a product unsurpassed in quality and reliability. Rol-Air is committed to continuing this tradition by analyzing and adapting to the changing needs and rigorous demands of the industry.
• Totally enclosed belt guard
• Loadless starting device
• Electric motors – nationally known brands, open drip-proof with multiple v-belt drives
• ASME Air Receivers – national board code approved
• Maximum working pressure – 200PSI (2 stage), 150PSI (1 stage)
• Pressure gauge in 5 lb. increments
• Start/stop controls
• Intake filter silencers with replaceable elements
• Pressure switch – set at 145/175 (2 stage), 110/135 (1 stage)
• Safety relief valve – ASME approved
MODEL NUMBERS: Based on specifications – horizontal and vertical available from 3 to 20 Bhp.